Waterproofing Products & Application
ELASTOROOF PU is a single component moisture curing tar extended polyurethane liquid
applied elastomeric membrane for waterproofing and protection of a wide range of surfaces.
The product cures to a tough rubber like finish with exceptional elasticity which allows for
expansion and contraction over a wide range of temperatures.
ELASTOROOF PU provides complete, seamless, waterproofing membrane free from joints
replacing asphalt systems and self-adhesive asphalt membranes.
ELASTOROOF PU has excellent bonding to substrate, thus, water cannot travel beneath the
membrane even if accidentally punctured.
ELASTOROOF PU is simple to apply by brush, roller or spraying application straight from the
ELASTOROOF PU may be applied to horizonta surfces without additional thinner. On vertical
surfaces it should be applied in multiple coats. A non sag grade is available where coating of
extensive vertical areas is required.
BASIC USES ELASTOROOF PU is ideally suited for the waterproofing of two course concrete
slab construction for parking garages, decks, shopping malls and plaza areas, bridge decks,
elevated side walks and roadways or in single course construction for waterproofing tunnels,
foundations, planters and base slabs in terrazzo and quarry tile floor installation and also as a
waterproofing between the structural slab and concrete topping of roofing system and under
flashings. Long term of continuous water submersion does not affect
ELASTOROOF PU adhesion to the substrate. Under such conditions, two part epoxy primer is
to be used prior to applying the membrane.
Contact us at:
(632) 643.9299 and 5710608
(632) 640.9020, 628.1017 and 640.9051
|JAN OWEN MARTIN
ONE COMPONENT ELASTOMERIC